AMPLIFIER + SUBWOOFER + SPEAKER + FREE COVER

APMR-1504
4 Channel Marine Amplifier
• Built-in Variable High Pass & Low Pass Crossover.
• Remote Sub-Woofer Volume Control.
• 55mm(H) x 176mm(W) x 382mm(L).
• 2.2 inches(H) x 6.9 inches(W) x 15 inches(L).
• Frequency Response: 20Hz - 20kHz
• Signal to Noise Ratio: 95dB
• Channel Separation: >65dB
• Total Harmonic Distortion: <0.05%
• Speaker Impedance: 2Ω To 4Ω
• Input Sensitivity: 0.25V - 5V
• Stereo 4 Ch - 75W x 4 @ 4Ω
• Stereo 4 Ch - 150W x 4 @ 2Ω
• Bridge 2 Ch - 300W x 2 @ 4Ω

APSW-612
6 1/2” High End Coaxial 2-Way Marine Speaker
• 200 Watts Power (PMPO)
• 100 Watts Power (RMS)
• Frequency Response: 45-20,000Hz
• Sensitivity: 90 dB
• Rubber Surround IMPP Cone
• Soft Dome Diaphragm High
Performance Tweeter
• Mounting Depth: 70mm (2.75”)
• 15 Oz Magnet

APSW-612
6 1/2” High End Coaxial
2-Way Marine Speaker
• 200 Watts Power (PMPO)
• 100 Watts Power (RMS)
• Frequency Response: 45-20,000Hz
• Sensitivity: 90 dB
• Rubber Surround IMPP Cone
• Soft Dome Diaphragm High Performance Tweeter
• Mounting Depth: 70mm (2.75”)
• 15 Oz Magnet

AMPLIFIER + SPEAKER + FREE COVER

APSW-612
6 1/2” High End Coaxial
2-Way Marine Speaker
• 200 Watts Power (PMPO)
• 100 Watts Power (RMS)
• Frequency Response: 45-20,000Hz
• Sensitivity: 90 dB
• Rubber Surround IMPP Cone
• Soft Dome Diaphragm High Performance Tweeter
• Mounting Depth: 70mm (2.75”)
• 15 Oz Magnet

APMR-2002
2 Channel Marine Amplifier
• Built-in Variable High Pass & Low Pass Crossover.
• RCA Line Input/Output Jacks.
• Electronic Protection Circuitry to Protect The Amplifier
from Short Circuit, DC Offset & Thermal Overload.
• Remote Sub-Woofer Volume Control.
• 55mm(H) x 176mm(W) x 260mm(L).
• 2.2 inches(H) x 6.9 inches(W) x 10.2 inches(L).

Specification:
• Frequency Response: 20Hz - 20kHz
• Signal to Noise Ratio: 100dB
• Channel Separation: >75dB
• Total Harmonic Distortion: <0.05%
• Speaker Impedance: 2Ω To 4Ω
• Input Sensitivity: 0.25V - 5V
• Crossover Frequency: 55Hz - 5.5KHz 12dB Stereo
• Bass Boost: 0-18dB @ 45Hz
• Output Power (RMS):
Stereo 2 Ch - 100W x 2 @ 4Ω
Stereo 2 Ch - 150W x 2 @ 2Ω
Bridge 1 Ch - 300W x 1 @ 4Ω